Vulkanised 2027 | Feb. 8 – 10 | Andrew D. Zonenberg | GB/s Real Time Oscilloscope Waveform Processing in Vulkan | Kortrijk, Belgium

Vulkanised 2027 Banner

IOActive’s Andrew Zonenberg takes the stage at Vulkanised 2027 in Kortrijk, Belgium (February 8–10, 2027) to show how GPU compute can process gigabytes per second of live oscilloscope data in real time.

His session, GB/s Real Time Oscilloscope Waveform Processing in Vulkan, runs at 16:30 on [DAY]. If you build, debug, or validate hardware, or you write Vulkan compute code and want to see it pushed somewhere unexpected, this is the talk to put on your schedule.

Inside the talk

Modern oscilloscopes sample faster than CPUs can keep up with. A single 4 GS/s capture produces tens of gigabits of data every second, and most analysis tools fall back to slow, after-the-fact processing.

ngscopeclient, the free and open-source oscilloscope remoting and signal processing suite Andrew leads, takes a different approach: it runs the heavy lifting on the GPU with Vulkan compute shaders. In this session Andrew walks through how that works across four workloads:

  • High-rate DSP: filtering, FFTs, and math on live streaming waveforms
  • Eye patterns: building eye diagrams from continuous high-speed serial data
  • Protocol decoding: turning raw samples into packets and bus traffic as they arrive
  • Visualization: a compute-shader waveform renderer that replaces the older triangle-tessellation approach

The headline result: speedups of one to three orders of magnitude (10x to 1,000x) on gigabytes per second of live data.

Why it matters

Faster waveform analysis shortens every loop in hardware work: bring-up, debug, signal integrity validation, and compliance testing. When decodes and eye patterns update live instead of minutes later, engineers find problems while the board is still on the bench.

It matters for security research too. Hardware reverse engineering and side-channel analysis start with captured waveforms, often power traces combined with serial bus traffic. Processing that data at GPU speed means larger captures, deeper analysis, and faster answers.

For Vulkan developers, the talk is a real-world case study of compute shaders doing non-graphics work at scale, with lessons that apply well beyond test and measurement.

What you’ll walk away with

  • Vulkan compute can dramatically accelerate waveform analysis for hardware design, debug, and validation.
  • A compute-shader waveform renderer beats triangle tessellation: it is faster and more flexible than the approach it replaced.
  • Practical patterns for moving high-rate DSP, eye diagrams, and protocol decodes onto the GPU.
  • A free, open-source tool you can download and use on your own bench the next day.

About the speaker

Andrew Zonenberg is a hardware security researcher at IOActive [confirm current title] and the creator of ngscopeclient. He started the project, originally glscopeclient, around 2011, and it has since grown into a full suite for instrument remote control, protocol decoding, and signal processing, built on the libscopehal and libscopeprotocols libraries.

His work spans open-source test and measurement, open hardware oscilloscope probes, and embedded and hardware reverse engineering. He has presented on ngscopeclient at venues including hardwear.io.

Join us in Kortrijk

EventVulkanised 2027, the 9th Vulkan Developer Conference
DatesFebruary 8–10, 2027
SessionGB/s Real Time Oscilloscope Waveform Processing in Vulkan
Time16:30, [DAY]
VenueThe Penta, Sint-Martens-Latemlaan 1B, 8500 Kortrijk, Belgium
HostHowest University of Applied Sciences
OrganizerThe Khronos Group

Vulkanised is the largest annual event for Vulkan developers, and it keeps registration fees low. The Real-Time Shading Symposium follows on February 11–12, so you can make a full week of it.

Register for Vulkanised 2027 and add Andrew’s 16:30 session to your schedule. Can’t make it? Download ngscopeclient and follow IOActive for a recap after the event.